Ceralia Ultrasonic Diffuser

Practical and easy to use, you will be won over by its soft, subdued lighting, making this diffuser an excellent decorative item.

This essential oil diffuser works by misting water. A few drops of essential oils added to the water are enough (15 drops maximum) to diffuse their smells and their benefits in your interior. Ultrasonic misting emits a light water mist that diffuses essential oils and pleasantly humidifies dry air.

Thanks to the technique of misting, the diffusion can reach up to 30m².

Ceralia diffuser operating principle

The misting is caused by the vibration of a ceramic disc at very high frequency which triggers ultrasound by its movement. This is why the Ceralia diffuser is ultrasonic by misting.

Ceralia Diffuser Features

• Light control
• Water level sensor and automatic shutdown when the level is low
• Diffusion area: up to 30m²
• Diffusion time: On/off button integrated under the product
• Power: 12W
• Package weight: 690g
• Other: Air Humidification

Ceralia Diffuser Diffuser Mount

1. The device must be placed on a horizontal and flat surface.
2. Connect the AC adapter to the diffuser without plugging it into an AC outlet.
3. Remove the ceramic casing and the cover.
4. Use tap water at room temperature (not demineralised water) to fill the base reservoir with a maximum of 80ml (do not exceed the maximum level mark).
5. Add 5 to 15 drops (maximum) of essential oils to diffuse in the water.
6. Replace the lid, then the ceramic trim on the base.
7. Plug the AC adapter into an AC outlet.
8. To turn on your Ceralia, simply press on the top of the device. This gesture will activate the "foot button" located under the device.

The Ceralia diffuser box contains

• Ceramic cladding
• A lid
• Base with ceramic disc
• A power adapter
• A notice.

Ceralia Diffuser Tips

The successive presses will offer you several operating modes:

• 1st press: mist diffusion + color-changing light
• 2nd press: diffusion of mist + light fixed on the last color that appeared
• 3rd press: diffuse mist without light
• 4th press: the device switches off (no mist or light)

Ceralia diffuser maintenance

1. Make sure your device is turned off.
2. Unplug the mains adapter from the mains socket, then disconnect the mains adapter from the Ceralia base.
3. Remove the ceramic casing and the lid.
4. Drain all remaining water from your Ceralia.
5. Use a clean cotton swab or soft cloth to clean the inside of the Cérélia; be careful not to press too hard on the ceramic disc; this element is fragile. This cleaning is recommended every 3 uses.

Precautions for using the Ceralia diffuser

Do not activate diffusion in the presence of children under 6 and pregnant women.In a child's room, we recommend that you do this without their presence and at least 30 minutes before their arrival

Before using the device, carefully read the precautions for use

Do not use chemical fragrances, only 100% natural essential oils. - Do not pour more than 15 drops of essential oils into the device.